PORTLAND, Ore. — Spot load-to-truck ratios for all three equipment types fell during the week ending Jan. 26, and truckload rates for vans and reefers drifted lower as shippers had little trouble finding trucks to haul their freight, reported DAT Solutions, which operates the industry’s largest load board network.
This current lull may be shorter than expected but for now conditions on the spot market favor shippers and demand a creative approach from truckers.
National average spot rates, January (through Jan. 26) included:
- Van: $1.90 per mile, down 4 cents from the December average
- Reefer: $2.27 per mile, down 3 cents from December but 9 cents higher than November
- Flatbed: $2.18 per mile, unchanged from December
Van trends
The national average spot van load-to-truck ratio slipped from 2.1 to 1.6 on neutral van volumes compared to the previous week. For the second straight week, the average van rate was lower on nearly all of DAT’s top 100 van lanes, and rates were higher only on lanes where pricing tends to be weak.
The good news is carriers can almost always find van loads in big Southeast retail freight hubs. The bad news is it’s hard to find lanes between these markets that pay well right now. For example, Memphis, Tennessee to Charlotte, North Carolina fell 14 cents to $1.95 a mile last week, while the return trip lost 9 cents to $1.45.
One option for carriers is to find higher-paying loads in smaller markets where they can triangulate. Instead of hauling a load from Charlotte back to Memphis, they can look for a load from Charlotte to Macon, Georgia, which currently averages $1.95 per mile, and then book a load from Macon to Memphis, which pays $2.11.
A Memphis-Charlotte round trip averaged $1.76 per loaded mile last week for a total of $2,166. The three-legged route through Macon averages $2.05 a mile, which at that rate would earn the carrier $2,806 while adding 136 paid miles to the trip. Depending on the driver’s hours of service, triangular routing may be a good choice in a tough rate environment.
Reefer trends
This is a quiet period for reefer freight, which is closely tied to domestic produce harvests. The national average reefer load-to-truck ratio was 3.8, down from 4.9 the previous week. As a result, the average spot rate fell on 71 of DAT’s top 72 reefer lanes by volume. The sole riser was Grand Rapids, Michigan, to Madison, Wisconsin.
Produce imports from Mexico and at some seaports tend to populate the spot market but many of the loads coming through these ports of entry are scheduled and moving under contract. Plus, there are lots of trucks available in those markets.
As a result, the average spot reefer rate fell on 71 of the top 72 reefer lanes by volume. The sole riser was Grand Rapids, Michigan, to Madison, Wisconsin.
These rates are based on RateView, DAT’s database of $68 billion in annual market transactions. DAT’s freight rate database also provides the settlement prices against which trucking freight future contracts are traded. For information, visit dat.com.
The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.
