Connect with us

Equipment

Double Coin and CMA say Thailand facility now at full capacity

Published

on

Double coin and cma say thailand facility now at full capacity
Built on a 3.6 million square-foot site, the Thailand facility has the capacity to manufacture over 1.8 million TBR tires as well as over 50,000 OTR tires. (Courtesy: DOUBLE COIN AND CMA)

MONROVIA, Calif. — Double Coin and CMA, a tire manufacturer and marketer say their Thailand manufacturing facility is now working at full capacity to produce over-the-road (OTR) and truck bus and radial (TBR) products.

“Our new Thailand manufacturing facility has full OTR and TRB availability and the production capacity to fulfill container-level orders,” said Tim Phillips vice president of marketing operations for Double Coin/CMA. “Not only does this production facility have the capacity to meet the demand for commercial tire products, we are offering them at competitive prices since they are not subject to anti-dumping and countervailing duties or tariffs penalties associated with products produced in China. With many of our competitors having to rely on China alone, Double Coin customers will be in an excellent purchasing position in the face of product shortages and higher prices from China.”

Phillips said some U.S. suppliers claim they have production availability in Vietnam or Thailand, but it remains to be seen if older plants in these areas that are already running at full capacity can offer any additional TBR and OTR products.

“The combination of our new state-of-art manufacturing facility and warehousing in Thailand where we can offer very competitive pricing, Double Coin is emerging as the clear choice for TBR and OTR tire products,” Phillips said.

Built on a 3.6 million square-foot site, the Thailand facility has the capacity to manufacture over 1.8 million TBR tires as well as over 50,000 OTR tires. The entire plant is controlled by the Manufacturing Execution System (MES) and is integrated with the SAP management system. Plans for expansion at the Thailand facility are currently underway.

“In addition to our production capacity at our Thailand facility, we currently have full capacity of Double Coin tires at our five warehouses in Memphis, Tennessee, Rancho Cucamonga, California, Vancouver, British Columbia, Canada, San Jose, Costa Rica, and Queretaro, Mexico,” Phillips said.

For more information about Double Coin Tires, visit www.doublecointires.com.

 

Continue Reading
Advertisement Best Truck Driving Jobs at Truck Job Seekers - Ad
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Kenworth to collaborate with Meritor on T680E Electric powertrain development

Published

on

concept photo of Kenworth electric model
The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4x2 and 6x4 axles and as a 6x4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application. (Courtesy: Kenworth)

KIRKLAND, Wash. — Kenworth has announced it will collaborate with Meritor on electric powertrain development for Class 8 Kenworth T680E battery-electric vehicles.

The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4×2 and 6×4 axles and as a 6×4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application.

“The Kenworth T680E development in collaboration with Meritor is a major advanced technology step in Kenworth’s evolution of zero-emission electric powertrain solutions for our customers,” said Kevin Baney, Kenworth general manager and PACCAR vice president. “Initial production of the Kenworth T680E is expected to begin in the fourth quarter 2020 and ramp through 2021.”

Meritor, Inc. is a global supplier of drivetrain, mobility, braking and aftermarket solutions for commercial vehicle and industrial markets. Meritor is based in Troy, Michigan.

“We look forward to working closely with Kenworth to help develop the Kenworth T680E as an important, viable battery-electric answer for the day cab market,” said T.J. Reed, vice president of Global Electrification for Meritor.

Continue Reading

Equipment

New Kenworth parts, service locations now open in Maryland and Nebraska

Published

on

Kenworth service location in Maryland
West Point Kenworth is approximately one hour south of Sioux City, Iowa, and located along Highway 275, a major trucking route in the area. (Courtesy: Kenworth)

WESTMINSTER, Md. And West Point, Neb. — Kenworth now offers additional locations for parts and services. Mid Atlantic Kenworth has added a full-service location in Westminster, Maryland, while Sioux Falls Kenworth has opened a new parts and services dealership in West Point, Nebraska.

Maryland

In Westminster, Maryland, the 17,400-square-foot facility features a full parts and service department, with 10 service bays to maximize customer uptime for truck operators passing through the area. A drivers’ lounge is available to customers while their trucks are serviced.

The facility, Kenworth Mid Atlantic Westminster is located on three acres, which offers customers ample room to park their trucks.

The Westminster, Maryland facility is located at 821 Baltimore Blvd. and its hours of operation are 7 a.m. to 5 p.m. Monday through Friday and 7 a.m. to 1 p.m. on Saturday.

Nebraska

With its new parts and service dealership in West Point, Nebraska, Sioux Falls Kenworth can now offer expanded support to fleets and operators in the greater Sioux City, Iowa area.

West Point Kenworth is approximately one hour south of Sioux City and located along Highway 275. The 12,800-square-foot building is situated on 3.5 acres. The facility features an 8,600-square-foot service department with eight service bays. Also included is a 1,200-square-foot parts retail display area and a 1,900-square-foot space for bulk storage.

The West Point facility is located at 1805 Sycamore St. in West Point. Hours of operation are from 8 a.m. to 5 p.m. Monday through Friday and 8 a.m. to 12 p.m. on Saturday.

Continue Reading

Equipment

Agility partners with XStream Trucking to distribute aerodynamic TruckWings

Published

on

a patented design allows truckwings to swing out and retract
The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract at lower speeds. (Courtesy: Agility Fuel Solutions)

COSTA MESA, Cali. — Agility Fuel Solutions and XStream Trucking have announced that Agility will be the exclusive distributor of Xstream’s TruckWings aerodynamic systems for compressed natural gas (CNG) trucks in North America. Agility will also distribute TruckWings on a non-exclusive basis to the diesel truck market.

The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract against the rear of the cab at lower speeds to leave room for turning maneuvers.

“TruckWings is the first device which completely solves the turbulence problem created by the open area between the tractor and trailer that contributes significantly to a truck’s overall aerodynamic drag,” said Daniel Burrows, XStream Trucking’s founder and CEO. “We are pleased to now partner with Agility to offer TruckWings as a factory option for CNG trucks in North America.”

Agility, a business area of Hexagon Composites ASA, and XStream Trucking have previously partnered to provide TruckWings systems for over 750 CNG trucks used by major fleet operators. Agility’s leadership in providing clean fuel solutions for commercial vehicles coupled with its extensive customer base and value-added aftermarket services will expand XStream’s TruckWings solution to reach the growing CNG truck market throughout North America.

“Agility’s trucking fleet customers are focused on fuel cost savings and on increasing the fuel economy of their CNG trucks. TruckWings are a great answer to this problem, as we’ve demonstrated in real-world use with some of our major fleet customers,” said Eric Bippus, Agility’s senior vice president of global sales and marketing. “We are very pleased to enter into this distribution agreement and to continue to work with XStream Trucking to deliver clean and efficient transportation solutions for the North American trucking market.”

Continue Reading

Trending