Connect with us

Equipment

Kenworth T880S with 52-, 76-inch sleepers now available for order

Published

on

Both size sleepers provide excellent interior height clearance, enabling a driver or passenger up to 6-foot-4 to easily stand up between the seats. Pictured is the 76-inch mid-roof sleeper. (Courtesy: KENWORTH TRUCK CO.)

KIRKLAND, Wash. — The Kenworth T880S with a set-forward front axle is now available for order with Kenworth’s 52-inch and 76-inch mid-roof sleepers.

The T880S sleeper configurations are focused on heavy haul and severe highway applications where ruggedness is especially required.

The two sleeper options enable the T880S to meet both overall combination length and weight distribution needs, and are applicable for both Canadian and U.S. markets, according to Kurt Swihart, Kenworth marketing director.

Kenworth’s 76-inch mid-roof sleeper can be ordered with either the optional back wall storage system or folding upper bunk.

The optional Kenworth Idle Management System provides a factory-installed, battery-based auxiliary power unit (APU). A premium sound system and flat screen TV mount are among other options that provide further driver comfort and satisfaction.

The Kenworth 52-inch mid-roof sleeper is a welcome sanctuary when the schedule requires a short layover. The sleeper features a liftable lower bunk and upper storage units on the sleeper’s back wall, including hanging storage for clothes and jackets. A bunk heater, flat screen TV, premium sound system and factory-installed inverter with optional shore power are available for additional comfort. The many driver comfort amenities help give the Kenworth T680’s 52-inch mid-size sleeper the feel of a larger sleeper.

Swihart said both sleepers provide excellent interior height clearance, enabling a driver or passenger up to 6-foot-4 to easily stand up between the seats. Specifying the 180-degree optional passenger swivel seat further expands the living space and enables the driver to use both the cab and the sleeper as a comfortable space for relaxation – when not driving.

“Our high-quality sleeper options for the T880S provides customers with an additional opportunity for enhanced driver comfort in their efforts for cost-effective operations and increased driver retention and recruitment,” Swihart said.

The T880S is offered with a set-forward front axle ranging from 14,600 pounds to 22,800 pounds, and is standard with the PACCAR MX-13 engine with up to 510 hp and 1,850 lb-ft of torque. For weight-sensitive applications, the 10.8-liter PACCAR MX-11 engine is 400 pounds lighter than larger displacement engines, and provides up to 430-hp and 1,650 lb-ft of torque.

For more information, visit www.kenworth.com

 

 

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Papé Kenworth Northwest opens 6,600 square-foot parts and service facility

Published

on

The new Papé Kenworth Northwest location features a 3,200 square-foot service department with three service bays, well-stocked parts department, and comfortable driver’s lounge. (Courtesy: KENWORTH TRUCK CO.)

BELLINGHAM, Wash. — Papé Kenworth Northwest has opened a new 6,600 square-foot parts and service facility in Bellingham, Washington.

Located 90 miles north of Seattle and 25 miles south of the Canadian border, the new Papé Kenworth Northwest-Bellingham dealership provides service and parts to customers traveling along the busy north-south Interstate 5 corridor.

The new location features a 3,200 square-foot service department with three service bays, well-stocked parts department, and comfortable driver’s lounge that drivers can enjoy while their trucks are serviced. The facility sits on more than 1.5 acres for convenient parking.

Papé Kenworth Northwest-Bellingham is at 1400 Iowa Street in Bellingham and offers easy I-5 access at Exit 254. Hours of operation are 8 a.m. to 5 p.m. Monday through Friday. The phone number is 360-526-2850.

Papé Kenworth Northwest operates six dealerships in Washington (Aberdeen, Bellingham, Lakewood, Marysville, SeaTac and Yakima). Papé Kenworth Alaska operates two dealerships in Anchorage and Fairbanks.

Papé Kenworth operates eight dealerships in Oregon – Donald, Eugene, Klamath Falls, Medford, Portland, Redmond, Roseburg and Tangent; five in central California  –  Bakersfield, Fresno, Santa Maria, Stockton and Turlock; and one in Washington – Kelso.

Papé Kenworth Northwest, Papé Kenworth Alaska and Papé Kenworth are part of The Papé family of Companies. For more information, visit www.papekenworth.com

 

 

Continue Reading

Equipment

Zonar updates transition checklist for switching AOBRDs to ELDs

Published

on

Zonar was founded in 2001 to help fleets of all sizes maximize the use of their assets with solutions dedicated to improving compliance, efficiency, maintenance, ridership visibility, safety and tracking. Courtesy: ZONAR)

SEATTLE — With less than six months to go until the final electronic logging device mandate Mandate deadline, many carriers using automatic on-board recording devices have still not transitioned to ELDs, according to Zonar officials.

The mandate grandfathered in fleets using AOBRD giving them until December 16, 2019, to switch to ELDs to avoid faulty products or services and reach full compliance.

As such, Zonar, a provider of fleet management technology, has updated its AOBRD transition checklist to help fleet managers strategically manage the limited time remaining to choose the right vendor and solution for their business. This guide outlines how carriers can find the best solution to fit their needs, by December 16, 2019.

“We understand that businesses are waiting to make the shift from ABOBRDs to ELDs for many reasons but non-compliance or choosing the wrong solution can potentially lead to lost revenue and multiple violations,” said Fred Fakkema, vice president of compliance at Zonar. “Since the mandate passed, we’ve listened to our customers and heard from decision makers across the industry; with this easy to follow checklist, Zonar aims to help those who need guidance regarding the transition within a shorter amount of time.”

Businesses can find the downloadable guide here.

This includes:

  • A workback calendar from August-December in checklist form
  • Questions fleet managers should ask vendors before signing a contract
  • Tips for training operators on new solutions

“With almost 20 years of experience helping fleets intelligently manage their business, Zonar creates technology solutions that collect and analyze data from a wide variety of vehicles including trucks, school buses, transit vehicles and construction equipment,” Fakkema said. “This information empowers drivers and fleet managers with the data and analysis needed to better navigate any route and safely manage passengers and cargo.”

ELDs were mandate by Congress to help the commercial transportation industry increase safety for all drivers on the road through in-vehicle technology to easily log data such as hours of service.

Zonar was founded in 2001 to help fleets of all sizes maximize the use of their assets with solutions dedicated to improving compliance, efficiency, maintenance, ridership visibility, safety and tracking, Fakkema said.

 

 

 

 

Continue Reading

Equipment

Platooning Peloton’s vision for trucking: drivers lead, technology follows

Published

on

Driver Assistive Truck Platooning is providing real safety and fuel efficiency benefits today, according to Peloton Technology CEO Josh Switkes. (Courtesy: PELOTON TECHNOLOGY)

ORLANDO, Fla. — Peloton Technology Inc., a connected and automated vehicle technology company, Wednesday unveiled its vision for doubling the productivity of drivers through the development of its new Level 4 Automated Following solution during the Automated Vehicle Symposium 2019 here.

“We’ve taken a different approach to commercial introduction of automation in Class 8 vehicles.” said Peloton Technology CEO Josh Switkes. “We see the drivers as the world’s best sensors, and we are leveraging this to enable today’s drivers to be more productive through automated following platoons.”

Peloton’s Automated Following is an advanced platooning system using vehicle-to-vehicle (V2V) technology to enable a single driver to drive a pair of vehicles and marks the next major milestone in Peloton’s unique approach to deploying automation to increase the safety and productivity of commercial vehicles.

Platooning and automated following systems work by utilizing V2V communications and radar-based active braking systems, combined with vehicle control algorithms. Peloton’s proprietary technologies link pairs of heavy trucks for connected driving that improves aerodynamics, fuel economy, and safety.

Peloton’s Level 1 (driver assistive) system, PlatoonPro, has a driver in both the lead and follow trucks. The driver in the follow truck steers, but the system controls the powertrain and brakes to manage the following distance very precisely and to provide immediate reaction to whatever acceleration or braking the lead truck performs.

PlatoonPro has now operated with six customers and additional customer fleet trials are under way. In each case the customer and Peloton have seen a perfect safety record.

“Customer trucks have shown fuel savings averaging over 7%, and we have seen very high percentages of miles platooned, as high as 90%,” Switkes said. “Platooned miles per day have exceeded 700 miles per truck in some cases, resulting in projected fuel savings per truck up to $7,000-10,000 per year.”

Platooning is the key enabler to making driverless semi-trucks a reality, Switkes said.

“Leveraging experience in deploying a commercial L1 platooning system, PlatoonPro, Peloton’s new Automated Following system is an SAE Level 4 autonomous solution that connects a fully-automated follow truck with a driver-controlled lead truck to platoon. The V2V link allows the human driven lead truck to guide the steering, acceleration and braking of the follow truck and connects the safety systems between the trucks. with minimal latency,” he said.

Peloton’s unique approach of combining the experience of a human driver in the lead truck with state-of-the-art sensors and hardware in the follow truck greatly simplifies many of the technical challenges the vehicle automation industry faces with deploying standalone SAE Level 4 driverless systems.  Peloton will be able to bring this solution to broad applicability for the industry on a rapidly increasing set of routes, weather conditions, and traffic conditions, expanding these operations much more rapidly than standalone (single vehicle) L4 solutions.

The professional driver is at the heart of the new Peloton L4 Automated Following solution much like they are with Peloton’s L1 commercial system, PlatoonPro.

“We continue to leverage drivers for their skills, experience and intuition, and engage with both Peloton test drivers as well as fleet drivers in all aspects of product design, development and testing,” Switkes said. “Our vision with the new L4 Automated Following product is to develop and commercially deploy a solution that will enable drivers to benefit from the ongoing commercial driver shortage by doubling the amount of freight they can haul in a single trip. This will result in improved work for drivers through better routes, schedules, and compensation, as well as better quality of life through expanding hub-to-hub and relay-style operations that allow drivers to be home with their families every night.”

 

Continue Reading

Trending