Connect with us

Equipment

Netradyne launches new integrated vision safety system

Published

on

Visionpro side view copy
This photo shows Netradyne’s Driveri Portal Event Access View with choice from eight different camera views. (Courtesy: NETRADYNE )

SAN DIEGO — Netradyne, a provider of artificial intelligence (AI) technology focusing on driver and fleet safety, has launched VisionPRO, a new integrated vision safety system that allows customers to choose up to eight different camera angles to capture and analyze greater visibility for driving events.

Traditionally, vision-safety systems within commercial fleets have had difficulty capturing the back or side of a truck, in many cases leading to “mystery damages” should an accident occur. With VisionPRO, camera views are seamlessly integrated into the Driveri portal giving fleet managers the ability to access desired views from a given incident, according to Adam Kahn, vice president of fleet business for Netradyne.

Netradyne launches new integrated vision safety system

Netradyne Driveri VisionPRO side camera views.

The further context protects drivers who may have been rear-ended or side swiped, which until now, would only be a speculative case for certain incidents due to a lack of visual evidence, he said.

While Driveri’s current system captures and analyzes every minute of the driving day, allowing for more positive coaching between driver and fleet manager and providing increased litigation mitigation, the addition of VisionPRO takes it a step further. Different camera views mean increased opportunities for driver engagement and protection, as well as more protection in cases of false claims.

“At Netradyne, we are continually looking for ways to improve Driveri to protect drivers and create opportunities for positive driving conversations,” Kahn said. “What we realized was most legacy camera systems out there had various blind spots that could allow for punitive measures to be taken without the full breadth of an event. With VisionPRO, drivers and fleet managers alike can rest easy knowing that nearly all angles of the truck are covered, protecting them from false accusations.”

Netradyne’s Driveri is a vision-based driver retention and safety platform for commercial vehicles, which captures and analyzes every minute of every driving day. The platform uses a high-quality HD cameras to provide a complete view of the road along with advanced AI and Edge Computing technologies to analyze driver behavior and relay data to fleet managers immediately.

For more information about Driveri or to inquire about commercial vehicle safety tools, please visit www.Netradyne.com.

Founded in 2015, Netradyne has technology innovation centers in both San Diego and Bangalore, India, where teams are hyper-focused on launching a driver safety platform for commercial vehicles.

 

Continue Reading
Advertisement Best Truck Driving Jobs at Truck Job Seekers - Ad
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Kenworth to collaborate with Meritor on T680E Electric powertrain development

Published

on

concept photo of Kenworth electric model
The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4x2 and 6x4 axles and as a 6x4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application. (Courtesy: Kenworth)

KIRKLAND, Wash. — Kenworth has announced it will collaborate with Meritor on electric powertrain development for Class 8 Kenworth T680E battery-electric vehicles.

The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4×2 and 6×4 axles and as a 6×4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application.

“The Kenworth T680E development in collaboration with Meritor is a major advanced technology step in Kenworth’s evolution of zero-emission electric powertrain solutions for our customers,” said Kevin Baney, Kenworth general manager and PACCAR vice president. “Initial production of the Kenworth T680E is expected to begin in the fourth quarter 2020 and ramp through 2021.”

Meritor, Inc. is a global supplier of drivetrain, mobility, braking and aftermarket solutions for commercial vehicle and industrial markets. Meritor is based in Troy, Michigan.

“We look forward to working closely with Kenworth to help develop the Kenworth T680E as an important, viable battery-electric answer for the day cab market,” said T.J. Reed, vice president of Global Electrification for Meritor.

Continue Reading

Equipment

New Kenworth parts, service locations now open in Maryland and Nebraska

Published

on

Kenworth service location in Maryland
West Point Kenworth is approximately one hour south of Sioux City, Iowa, and located along Highway 275, a major trucking route in the area. (Courtesy: Kenworth)

WESTMINSTER, Md. And West Point, Neb. — Kenworth now offers additional locations for parts and services. Mid Atlantic Kenworth has added a full-service location in Westminster, Maryland, while Sioux Falls Kenworth has opened a new parts and services dealership in West Point, Nebraska.

Maryland

In Westminster, Maryland, the 17,400-square-foot facility features a full parts and service department, with 10 service bays to maximize customer uptime for truck operators passing through the area. A drivers’ lounge is available to customers while their trucks are serviced.

The facility, Kenworth Mid Atlantic Westminster is located on three acres, which offers customers ample room to park their trucks.

The Westminster, Maryland facility is located at 821 Baltimore Blvd. and its hours of operation are 7 a.m. to 5 p.m. Monday through Friday and 7 a.m. to 1 p.m. on Saturday.

Nebraska

With its new parts and service dealership in West Point, Nebraska, Sioux Falls Kenworth can now offer expanded support to fleets and operators in the greater Sioux City, Iowa area.

West Point Kenworth is approximately one hour south of Sioux City and located along Highway 275. The 12,800-square-foot building is situated on 3.5 acres. The facility features an 8,600-square-foot service department with eight service bays. Also included is a 1,200-square-foot parts retail display area and a 1,900-square-foot space for bulk storage.

The West Point facility is located at 1805 Sycamore St. in West Point. Hours of operation are from 8 a.m. to 5 p.m. Monday through Friday and 8 a.m. to 12 p.m. on Saturday.

Continue Reading

Equipment

Agility partners with XStream Trucking to distribute aerodynamic TruckWings

Published

on

a patented design allows truckwings to swing out and retract
The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract at lower speeds. (Courtesy: Agility Fuel Solutions)

COSTA MESA, Cali. — Agility Fuel Solutions and XStream Trucking have announced that Agility will be the exclusive distributor of Xstream’s TruckWings aerodynamic systems for compressed natural gas (CNG) trucks in North America. Agility will also distribute TruckWings on a non-exclusive basis to the diesel truck market.

The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract against the rear of the cab at lower speeds to leave room for turning maneuvers.

“TruckWings is the first device which completely solves the turbulence problem created by the open area between the tractor and trailer that contributes significantly to a truck’s overall aerodynamic drag,” said Daniel Burrows, XStream Trucking’s founder and CEO. “We are pleased to now partner with Agility to offer TruckWings as a factory option for CNG trucks in North America.”

Agility, a business area of Hexagon Composites ASA, and XStream Trucking have previously partnered to provide TruckWings systems for over 750 CNG trucks used by major fleet operators. Agility’s leadership in providing clean fuel solutions for commercial vehicles coupled with its extensive customer base and value-added aftermarket services will expand XStream’s TruckWings solution to reach the growing CNG truck market throughout North America.

“Agility’s trucking fleet customers are focused on fuel cost savings and on increasing the fuel economy of their CNG trucks. TruckWings are a great answer to this problem, as we’ve demonstrated in real-world use with some of our major fleet customers,” said Eric Bippus, Agility’s senior vice president of global sales and marketing. “We are very pleased to enter into this distribution agreement and to continue to work with XStream Trucking to deliver clean and efficient transportation solutions for the North American trucking market.”

Continue Reading

Trending