TheTrucker.com

Spot freight rates still high but slide again

Reading Time: 2 minutes

The national average van rate fell 6 cents to $2.18/mile during the week ending August 11, marking five straight weeks of declines after one of the most robust periods for spot truckload freight pricing in memory, according to DAT Weekly Spot Freight Market Brief.

Likewise, the national flatbed rate dipped 6 cents to $2.69/mile and the reefer rate slipped 3 cents to $2.51/mile compared to the previous week.

Rates remain roughly 20% higher compared to this time of year, however.

The number of load posts on the DAT network of load boards edged down 5 percent last week while truck posts rose 3 percent. With more trucks competing for fewer loads, load-to-truck ratios softened for all three equipment types:

  • Van ratio: 6.9 loads per truck, down 3 percent compared to the previous week
  • Reefer ratio: 8.5, down 5 percent
  • Flatbed ratio: 29.5, down 19 percent to near where it was at this time a year ago

VAN TRENDS: Spot market volumes declined 1 percent last week compared to the week before, while truck posts increased 2 percent. Prices were down in most markets but rates held up the best out of the Midwest and in fact rose on a handful of regional lanes:

  • Columbus, Ohio, to Buffalo, N.Y.: $3.77/mile, up 23 cents
  • Buffalo to Allentown, Pennsylvania: $3.46/mile, up 11 cents
  • Chicago to Los Angeles: $1.54/mile, up 9 cents

Outbound rates in Dallas and Houston have fallen more than 10 percent in the past month and currently sit at $2/mile and $2.10/mile, respectively. Pipeline capacity is tight in the West Texas oilfields, leading to a slowdown in drilling, and steel tariffs have made new projects more expensive, since it’s not easy to source domestically, depending on the type of project.

REEFER TRENDS: Reefer demand has been cooling down since its peak in June. The number of load posts on DAT load boards was down 3 percent last week, while truck posts increased 3 percent. The national reefer load-to-truck ratio is now below where it was at this time a year.

One factor: shipments out of California have stalled, perhaps hampered by wildfires, and as a result these volumes weren’t there to offset declines in other parts of the country. Two lanes out of California showed significant declines:

  • Fresno to Seattle dropped 24 cents to $3.41/mile
  • Sacramento to Portland, Oregon, was down 21 cents but still averaged $3.90/mile

Melon shipments did bolster load counts from McAllen, Texas. Apple season also boosted volumes out of the Midwest.

DAT Trendlines is generated using DAT RateView, an innovative service that provides real-time reports on prevailing spot market and contract rates, as well as historical rate and capacity trends. RateView’s comprehensive database is comprised of more than $45 billion in freight bills in over 65,000 lanes. DAT load boards average 993,000 load posts per business day.

For the latest spot market load availability and rate information, visit www.dat.com/trendlines and join the conversation on Twitter with @LoadBoards.

The Trucker News Staff

The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.

Avatar for The Trucker News Staff
The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.
For over 30 years, the objective of The Trucker editorial team has been to produce content focused on truck drivers that is relevant, objective and engaging. After reading this article, feel free to leave a comment about this article or the topics covered in this article for the author or the other readers to enjoy. Let them know what you think! We always enjoy hearing from our readers.

COMMENT ON THIS ARTICLE