TheTrucker.com

Spot truckload freight availability softens; rates stay elevated

Reading Time: 2 minutes
Spot truckload freight availability softens; rates stay elevated

BEAVERTON, Ore. — National spot truckload rates were neutral or slightly down during the week ending September 22 but remain roughly 20 percent higher year over year, said DAT Solutions, which operates the DAT network of load boards.

The national average spot van rate fell 1 cent to $2.15/mile, the refrigerated rate dipped 1 cent to $2.53/mile and the flatbed rate declined 2 cents to $2.56/mile.

The overall number of loads posted decreased last week as road closures and limited access to the Carolinas likely prevented stronger demand from forming. This situation will likely turn around as relief and replenishment supplies move in.

One reason spot rates are higher is the price of fuel, DAT said. The national average price of on-highway diesel was $3.27 per gallon last week and is 23 percent higher compared to this time last year. Spot rates incorporate a fuel surcharge.

VAN TRENDS: The number of van load posts on DAT load boards fell 17 percent and truck posts dropped 21 percent compared to the previous week. That resulted in a 5 percent increase in the national load-to-truck ratio, moving up to 7.0 loads per truck. Van rates increased on several lanes from the Northeast and Southeast into Charlotte, including Philadelphia to Charlotte, which jumped 21 cents to $2/mile compared to the previous week.

REEFER TRENDS: Reefer load posts declined 19 percent while truck posts fell 21 percent last week. That resulted in a 3 percent increase in the load-to-truck ratio, from 7.7 to 8.0 loads per truck. The average rate tumbled on several produce lanes in the Midwest and Southeast:

  • Green Bay, Wisconsin, to Des Moines, Iowa: $2.36/mile, down 39 cents
  • Grand Rapids, Michigan to Philadelphia: $4.02/mile, down 18 cents
  • Atlanta to Lakeland, Florida: $3.35/mile, down 13 cents

FLATBED TRENDS: Last week flatbed load posts fell 12 percent but truck posts declined 23 percent on DAT load boards. That caused the national flatbed load-to-truck ratio to jump 14 percent from 23.3 to 26.6 loads per truck. Among the lanes showing strength:

  • Cleveland to Houston: $2.05/mile, up 28 cents
  • Baltimore to Charlotte, North Carolina: $1.91/mile, up 12 cents
  • Tampa to Atlanta: $1.75/mile, up 17 cents

DAT Trendlines is generated using DAT RateView, an innovative service that provides real-time reports on prevailing spot market and contract rates, as well as historical rate and capacity trends. RateView’s comprehensive database is comprised of more than $45 billion in freight bills in over 65,000 lanes. DAT load boards average 993,000 load posts per business day.

For the latest spot market load availability and rate information, visit http://dat.com/trendlines and join the conversation on Twitter with @LoadBoards.

The Trucker News Staff

The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.

Avatar for The Trucker News Staff
The Trucker News Staff produces engaging content for not only TheTrucker.com, but also The Trucker Newspaper, which has been serving the trucking industry for more than 30 years. With a focus on drivers, the Trucker News Staff aims to provide relevant, objective content pertaining to the trucking segment of the transportation industry. The Trucker News Staff is based in Little Rock, Arkansas.
For over 30 years, the objective of The Trucker editorial team has been to produce content focused on truck drivers that is relevant, objective and engaging. After reading this article, feel free to leave a comment about this article or the topics covered in this article for the author or the other readers to enjoy. Let them know what you think! We always enjoy hearing from our readers.

COMMENT ON THIS ARTICLE