Connect with us

Equipment

Utility Trailers Glade Spring, Virginia, plant receives Liberty Mutual safety award

Published

on

Utility trailers glade spring, virginia, plant receives liberty mutual safety award
Glade Spring plant employees gather to celebrate the company’ safety award. Back row frim left, Ralph McMahan, Richard Carver, Rick Mitchell, Michael Phipps, Derrick McGhee, David Sturgill, Sam Hawkins, Tim Jones, Tim McVey. Middle Row: Sam Cassell, Marc Worley, Clarissa Bise, Lucas Jordan, Jeremy Casey, Coy Stokes, Linda Williams, Jeff Hendricks, Odie Barker Front Row: Keith Walsh and Richard Williams. (Courtesy: UTILITY TRAILER MANUFACTURING CO.)

CITY OF INDUSTRY, Calif. — Utility Trailer Manufacturing Co., said that its Glade Spring, Virginia, manufacturing plant has received the Liberty Mutual Silver Safety Award from Liberty Insurance.

The award is based on the days away, restricted and transferred (DART) rate, which is calculated from the number of hours worked relative to the number of accidents at the plant

In 2018, Utility’s Glade Spring plant had a DART rate of only 1.36, with over 1.3 million worked hours. The average DART rate for the trailer manufacturing industry is significantly higher, at 3.9.  A Silver Safety Award is presented for DART rates that are at least 40% lower than the industry average rate.  The Glade Spring plant’s DART rate was nearly 1/3 of the industry rate.

“Receiving a safety award is an honor and takes a total team effort to accomplish. Keeping safety at the forefront everyday with employee participation is key to earning such an award. Employees identifying hazards, removing them, or managing them in the workplace, keeps us all safe,” said Keith Walsh, Utility’s Glade Spring Environmental Health & Safety (EHS) Manager.

“This is the fifth Liberty Safety Award for the Glade Spring plant. This is a huge honor, particularly considering less than 0.5% of Liberty’s customers receive this award. More importantly, our employees are continuously focused on the safety of themselves and each other,” said Bob Griffis, corporate EHS manager for Utility Trailer Manufacturing, Co.

“Walking through the front door of the Glade Spring facility, the commitment this team has toward safety is obvious,” said Sam Cassell, Utility’s Glade Spring plant manager. “It is reflected by the five safety awards hanging on the wall. Each of our over 700 team members were part of achieving each of those awards. An award like this is more than a commitment towards doing the job safely, it is a commitment each team member has toward each other. Many of our employees will stop others, even managers, to point out safety issues. That is a commitment toward safety and to each other. I cannot express how proud I am of each person on the shop floor.”

Richard Williams of Liberty Mutual Insurance, Risk Control Services, presented the Safety Award to a group of Glade Spring employees on behalf of all Utility’s Glade Spring employees.

Utility Trailer Manufacturing Co. was founded in 1914 and designs and manufactures dry freight vans, flatbeds, refrigerated vans, Tautliner curtain-sided trailers, and aerodynamic technologies. Utility currently operates six trailer manufacturing facilities across North America.

For more information, visit www.utilitytrailer.com.

 

 

Continue Reading
Advertisement Best Truck Driving Jobs at Truck Job Seekers - Ad
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Kenworth to collaborate with Meritor on T680E Electric powertrain development

Published

on

concept photo of Kenworth electric model
The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4x2 and 6x4 axles and as a 6x4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application. (Courtesy: Kenworth)

KIRKLAND, Wash. — Kenworth has announced it will collaborate with Meritor on electric powertrain development for Class 8 Kenworth T680E battery-electric vehicles.

The electric Kenworth T680E will be a short-hood day cab in tractor configurations of 4×2 and 6×4 axles and as a 6×4 axle straight truck. The T680E will offer an operating range between 100 to 150 miles, depending on application.

“The Kenworth T680E development in collaboration with Meritor is a major advanced technology step in Kenworth’s evolution of zero-emission electric powertrain solutions for our customers,” said Kevin Baney, Kenworth general manager and PACCAR vice president. “Initial production of the Kenworth T680E is expected to begin in the fourth quarter 2020 and ramp through 2021.”

Meritor, Inc. is a global supplier of drivetrain, mobility, braking and aftermarket solutions for commercial vehicle and industrial markets. Meritor is based in Troy, Michigan.

“We look forward to working closely with Kenworth to help develop the Kenworth T680E as an important, viable battery-electric answer for the day cab market,” said T.J. Reed, vice president of Global Electrification for Meritor.

Continue Reading

Equipment

New Kenworth parts, service locations now open in Maryland and Nebraska

Published

on

Kenworth service location in Maryland
West Point Kenworth is approximately one hour south of Sioux City, Iowa, and located along Highway 275, a major trucking route in the area. (Courtesy: Kenworth)

WESTMINSTER, Md. And West Point, Neb. — Kenworth now offers additional locations for parts and services. Mid Atlantic Kenworth has added a full-service location in Westminster, Maryland, while Sioux Falls Kenworth has opened a new parts and services dealership in West Point, Nebraska.

Maryland

In Westminster, Maryland, the 17,400-square-foot facility features a full parts and service department, with 10 service bays to maximize customer uptime for truck operators passing through the area. A drivers’ lounge is available to customers while their trucks are serviced.

The facility, Kenworth Mid Atlantic Westminster is located on three acres, which offers customers ample room to park their trucks.

The Westminster, Maryland facility is located at 821 Baltimore Blvd. and its hours of operation are 7 a.m. to 5 p.m. Monday through Friday and 7 a.m. to 1 p.m. on Saturday.

Nebraska

With its new parts and service dealership in West Point, Nebraska, Sioux Falls Kenworth can now offer expanded support to fleets and operators in the greater Sioux City, Iowa area.

West Point Kenworth is approximately one hour south of Sioux City and located along Highway 275. The 12,800-square-foot building is situated on 3.5 acres. The facility features an 8,600-square-foot service department with eight service bays. Also included is a 1,200-square-foot parts retail display area and a 1,900-square-foot space for bulk storage.

The West Point facility is located at 1805 Sycamore St. in West Point. Hours of operation are from 8 a.m. to 5 p.m. Monday through Friday and 8 a.m. to 12 p.m. on Saturday.

Continue Reading

Equipment

Agility partners with XStream Trucking to distribute aerodynamic TruckWings

Published

on

a patented design allows truckwings to swing out and retract
The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract at lower speeds. (Courtesy: Agility Fuel Solutions)

COSTA MESA, Cali. — Agility Fuel Solutions and XStream Trucking have announced that Agility will be the exclusive distributor of Xstream’s TruckWings aerodynamic systems for compressed natural gas (CNG) trucks in North America. Agility will also distribute TruckWings on a non-exclusive basis to the diesel truck market.

The patented TruckWings design incorporates folding panels made of impact-resistant, glass-reinforced composites attached to the rear sides and roof of the cab that automatically swing out to close the cab-to-trailer gap at highway speeds and retract against the rear of the cab at lower speeds to leave room for turning maneuvers.

“TruckWings is the first device which completely solves the turbulence problem created by the open area between the tractor and trailer that contributes significantly to a truck’s overall aerodynamic drag,” said Daniel Burrows, XStream Trucking’s founder and CEO. “We are pleased to now partner with Agility to offer TruckWings as a factory option for CNG trucks in North America.”

Agility, a business area of Hexagon Composites ASA, and XStream Trucking have previously partnered to provide TruckWings systems for over 750 CNG trucks used by major fleet operators. Agility’s leadership in providing clean fuel solutions for commercial vehicles coupled with its extensive customer base and value-added aftermarket services will expand XStream’s TruckWings solution to reach the growing CNG truck market throughout North America.

“Agility’s trucking fleet customers are focused on fuel cost savings and on increasing the fuel economy of their CNG trucks. TruckWings are a great answer to this problem, as we’ve demonstrated in real-world use with some of our major fleet customers,” said Eric Bippus, Agility’s senior vice president of global sales and marketing. “We are very pleased to enter into this distribution agreement and to continue to work with XStream Trucking to deliver clean and efficient transportation solutions for the North American trucking market.”

Continue Reading

Trending