Connect with us

Equipment

WABCO offering new safety solutions, reman steering gears for aftermarket

Published

on

LAS VEGAS — WABCO Holdings, a global supplier of braking control systems and other safety technologies used the platform of the Heavy Duty Aftermarket Week here to reveal new safety solutions as well as certified Sheppard remanufactured steering gears for the North American aftermarket.

The announcements reflect the company’s continued investment in high-quality systems and parts for commercial vehicles at every stage of the ownership lifecycle, said Abe Aon,

WABCO regional aftermarket sales leader, North America.

Aon said products unveiled during the show included:

  • WABCO OnSide and OnGuardACTIVE Retrofit Kits. Fast and easy to install, these kits enable fleets to add the latest, market-proven collision mitigation/avoidance technologies to existing vehicles, Aon said. OnSide Blind Spot Detection is a radar-based system that supports drivers in passing and lane-change maneuvers. The system provides a warning when it detects a moving vehicle within a 160-degree blind spot range. OnGuardACTIVE is a radar-based active safety system that can offer collision mitigation, adaptive cruise control and forward collision warning. When needed, the system can actively apply the brakes to help avoid or mitigate a collision.
  • WABCO Remanufactured Enhanced Easy-Stop Trailer ABS Systems. Available in one- and two-modulator configurations to meet the requirements of virtually any trailer application, these original equipment-quality systems ensure proper braking force is delivered for exceptional trailer stability and control. With the combination of OE-quality construction and performance, WABCO remanufactured Enhanced Easy-Stop systems also help avoid wheel lock-up and reduce excessive tire wear and flat spotting, Aon said.
  • Genuine Sheppard Remanufactured Steering Gears. In 2017, WABCO acquired R.H. Sheppard Co., Inc., a global leader in steering gears and other products for the original equipment and replacement markets. WABCO now offers nearly 400 genuine Sheppard remanufactured steering gear variants, each guaranteed to both look and perform like new. Each unit must pass a 17-point performance check before being approved for market use. In addition, these remanufactured units are covered by the same warranty as Sheppard OEM-service new replacement gears.

“WABCO can help fleets enhance vehicle productivity and safety through innovative retrofit solutions as well as repairs needed at any stage of the ownership lifecycle,” Aon said. “Our aftermarket brands are marks of excellence in each of their respective categories, delivering added confidence and value to every purchase.”

For more information, visit wabco-auto.com.

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Decker Truck Line presents 2,500th Peterbilt to 2018 Grand Champion Driver of the Year

Published

on

DENTON, Texas — Peterbilt Motors Co., along with Decker Truck Line, celebrated a relationship spanning six decades with the delivery of the transportation company’s 2,500th Peterbilt truck purchased from JX Truck Center.

Decker runs a mix of Peterbilt vehicles, including the Model 579 UltraLoft, for both its refrigerated and flatbed operations. The company also runs Peterbilt’s Model 389 which is awarded to Decker’s most senior drivers.

“Decker purchased its first Peterbilt truck more than 50 years ago starting a relationship that has continued to grow stronger through many decades of doing business together,” said Robert Woodall, Peterbilt’s assistant general manager for sales and marketing. “I am proud of the relationship Peterbilt has with Decker and I congratulate them on a long history of industry leadership.”

“Over the years of purchasing Peterbilt trucks, I have enjoyed working with numerous Peterbilt general managers, sales executives, the JX Truck Center management team and various levels of support staff,” said Don Decker, president and chairman of the Board, Decker Truck Line, Inc. “The partnership has been one of the most meaningful and rewarding relationships I have experienced. I think it speaks for itself how impressed we are with Peterbilt and JX as we take delivery of our 2,500th Peterbilt from JX Truck Center.”

The 2,500th truck, a custom 2019 Peterbilt Model 389, will be awarded to Decker’s 2018 Grand Champion Driver of the Year Steve Alliger. Since joining Decker in 1997, Alliger has accumulated more than 3 million miles of safe driving, and in 2018 alone he made more than 160 deliveries covering more than 150,000 miles.

“Out of all our professional drivers, Steve was chosen to receive our 2,500th Peterbilt because he is dedicated to getting the job done right the first time and every time. Steve was chosen as our Grand Champion Professional Driver of the Year in 2018 because of his impeccable driving record,” Decker said. “He has driven more than 3.3 million safe miles, has nearly a perfect Driver Scorecard, no CSA violations or service failures and has been recognized for the dedication and pride he puts into his profession every day. Steve is just one of  those Drivers who is a shining example of a true “professional driver and we are very proud to have him represent Decker Truck Line and the trucking industry.”

 

 

Continue Reading

Equipment

New Alliance Parts products, retail locations creates one-stop solution

Published

on

Alliance Parts has also recently opened 13 new stand-alone retail stores in North America, in locations including Hartford, Conn., and St. Cloud, Minn., and has also expanded retail areas at 22 different dealerships. (Courtesy: DAIMLER TRUCKS NORTH AMERICA)

PORTLAND, Ore. — With the recent addition of new retail locations and more value-based parts to its portfolio, Alliance Parts is fulfilling Daimler Trucks North America (DTNA)’s vision of a one-stop solution, providing exceptional customer experiences and parts to customers when and where they need them.

The growing parts portfolio, increasing retail footprint, and ability to deliver parts in 24 hours or less will benefit customer uptime.

Alliance Parts has added more than 11 new value product lines to its portfolio. The addition of the new parts – which includes items ranging from diesel exhaust fluid (DEF) filters and air brake compressors to slack adjustors – broadens an already expansive portfolio of products available at dealerships, as well as stand-alone Alliance Parts retail locations.

Alliance Parts has also recently opened 13 new stand-alone retail stores in North America, in locations including Hartford, Conn., and St. Cloud, Minn., and has also expanded retail areas at 22 different dealerships.

“We set aggressive goals to expand our retail footprint and value-based product offerings to meet our long-term objective of creating superior experiences that will help our customers get back on the road,” said Brad Williamson, director, Alliance Parts and Detroit Reman Marketing & Sales. “We’re proud of the strides we’ve already made with our new products and retail locations, and we’re continuing our push to be the customers’ first choice for value parts.”

Go to www.AllianceParts.com for a complete list of Alliance Parts locations and available products.

Continue Reading

Equipment

Papé Kenworth Northwest opens 6,600 square-foot parts and service facility

Published

on

The new Papé Kenworth Northwest location features a 3,200 square-foot service department with three service bays, well-stocked parts department, and comfortable driver’s lounge. (Courtesy: KENWORTH TRUCK CO.)

BELLINGHAM, Wash. — Papé Kenworth Northwest has opened a new 6,600 square-foot parts and service facility in Bellingham, Washington.

Located 90 miles north of Seattle and 25 miles south of the Canadian border, the new Papé Kenworth Northwest-Bellingham dealership provides service and parts to customers traveling along the busy north-south Interstate 5 corridor.

The new location features a 3,200 square-foot service department with three service bays, well-stocked parts department, and comfortable driver’s lounge that drivers can enjoy while their trucks are serviced. The facility sits on more than 1.5 acres for convenient parking.

Papé Kenworth Northwest-Bellingham is at 1400 Iowa Street in Bellingham and offers easy I-5 access at Exit 254. Hours of operation are 8 a.m. to 5 p.m. Monday through Friday. The phone number is 360-526-2850.

Papé Kenworth Northwest operates six dealerships in Washington (Aberdeen, Bellingham, Lakewood, Marysville, SeaTac and Yakima). Papé Kenworth Alaska operates two dealerships in Anchorage and Fairbanks.

Papé Kenworth operates eight dealerships in Oregon – Donald, Eugene, Klamath Falls, Medford, Portland, Redmond, Roseburg and Tangent; five in central California  –  Bakersfield, Fresno, Santa Maria, Stockton and Turlock; and one in Washington – Kelso.

Papé Kenworth Northwest, Papé Kenworth Alaska and Papé Kenworth are part of The Papé family of Companies. For more information, visit www.papekenworth.com

 

 

Continue Reading

Trending